Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in contact with food, in accordance with the following prescribed conditions:
（a） The additive is a mixture of liquid hydrocarbons derived from petroleum or synthesized from petroleum gases. The additive is chiefly paraffinic, isoparaffinic, or naphthenic in nature.
（b） The additive meets the following specifications:
（1） Odor is faint and not kerosenic.
（2） Initial boiling point is 300 °F minimum.
（3） Final boiling point is 650 °F maximum.
（4） Ultraviolet absorbance limits determined by method specified in § 178.3620（b）（1）（ii）, as follows:
| Wavelength (Mµ) | Maximum absorb-ance per centimeter optical pathlength |
| 280 to 289 | 4.0 |
| 290 to 299 | 3.3 |
| 300 to 329 | 2.3 |
| 330 to 360 | .8 |
（c） The additive is used as follows:
| Use | Limitations |
| As a plasticizer and absorber oil in the manufacture of polyolefin articles authorized for food contact use | In an amount not to exceed that required to produce intended effect, consistent with good manufacturing practice. |
| As a lubricant of fibers of textiles authorized for food contact use | At a use level not to exceed 0.15 percent by weight of finished fibers. |
| As a component of adhesives | Complying with § 175.105 of this chapter. |
| As a defoamer in the manufacture of paper and paperboard | Complying with § 176.210 of this chapter. |
| As a defoamer in coatings | Complying with § 176.200 of this chapter. |
更多国外法规翻译，请联系食品翻译中心
编辑：foodfagui